Special hydraulic fluids increase energy efficiency in injection molding machines

1371
  • Lower energy consumption through optimized hydraulic fluids
  • Technology improves flow characteristics of hydraulic fluids
  • Successfully used in injection molding machines
  • More than 10% energy savings possible .

Lowering production costs and conserving resources: a possble way to reach these goals is to increase energy efficiency through the use of optimized hydraulic fluids. The Dynavis technology from Evonik Industries offers a promising approach for hydraulically operated machines in plastics processing

More than 10% energy savings possible

By optimizing the viscosity of the custom-tailored fluid, it is possible to achieve energy savings in manufacturing processes. Compared to conventional fluids, those formulated with Dynavis technology can lower the energy consumption of some injection molding machines by more than 10%. The technology is used by some of the world’s leading companies, such as TOTAL, Indian Oil Corporation, and Indonesia’s PT Pertamina Lubricants.

Technology improves flow characteristics of hydraulic fluids

The technology improves the flow characteristics of hydraulic fluids by widening the temperature range and efficiency of hydraulic units. Normally, hydraulic equipment works with high efficiency in just a particular temperature range; at temperatures that are too high or too low, the performance of the machine can drop. Oils formulated with Dynavis technology have optimized viscosity: at low temperatures they flow better, while at higher temperatures they remain more viscous. When used in injection molding machines, the machine not only uses less drive energy, the fluids with Dynavis also do not get as hot and effectively withstand the shearing forces.

Case studies demonstrate efficiency

The efficiency has already been demonstrated in several case studies in cooperation with major construction companies. Used in hydraulic excavators and other construction equipment, the fluid saved an average of 10-15% compared to previous fuel consumption. For use in the plastics area, Dynavis has been tested in automated injection molding equipment of the brands BOY and Engel. It was found that the fluids formulated with Dynavis technology reached the optimal temperature range faster and maintained it more precisely. This resulted in energy savings of 7 to 10 percent, corresponding to cost savings of about 400 Euro per year for the BOY 35E, and energy savings of 6.2 percent of the drive energy and about 1200 Euro per year for the Engel Victory 330/120 Tech.

·


Related Articles & Comments

Comments are closed.